![]() ![]() The device is receiving a software update over the local Wi-Fi network. If the blinking remains constant, the device is connected to the local Wi-Fi network but not the Savant Host. The device is connecting to your network and establishing communication with the Savant Host or Savant App. The device is ready to be connected to the local Wi-Fi network The device has established communication with both the local Wi-Fi network and Savant Host. More than 1 minute – Device can't locate the Wi-Fi network it was formerly connected to. The state will change once boot is complete. The Savant 1.x products use the following codes on their LED status lights. ![]() Host communicates with the IP Cloud using port 443.Sonos speakers communicate with host using port 3401.Multicast packets are broadcast on port 1900. UDP packets are broadcast on ports 914.Do not utilize a Guest Network to set up the various Savant devices to a network.Therefore, all devices communicating with a Savant device must be added to the same subnet (Ex: 192.168.1.xxx). All Savant devices use self-discovery methods.Network should employ one of the network security formats shown above.Ensure that the network router can handle the additional IP Addresses that will be added through the Savant network. #SAVANT HOME CONTROL INSTALL#
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |